CompTIA A+ Hardware Practice Test: Memory, Storage and Components
- Motherboards, Memory and Storage
- 10 questions
- 13 minutes
Ten questions on PC components, storage types and safe handling, the fundamentals that most entry-level IT exams cover. Tip: think about what each part physically does before you compare the options.
Tap an option to mark your answer. You can change your mind, or tap the same option again to leave the question blank. The correct answers and explanations appear when you finish the test.Tap an option to answer; tap it again to leave the question blank.
Your result
- 0 correct
- 0 wrong
- 0 blank
-
Question 1
Which component is volatile memory, meaning its contents are lost when the computer loses power?
Correct answer: B
RAM holds data only while powered. SSDs, hard drives and the firmware chip keep their contents without power.
-
Question 2
A technician tries to seat a DDR5 memory module in a slot built for DDR4 and it will not go in. What is the most likely reason?
Correct answer: D
DDR generations use differently placed notches to prevent installing the wrong type. The module length is not what blocks it.
-
Question 3
A server uses exactly two drives that hold identical copies of the same data, so it keeps running if one drive fails. Which RAID level is this?
Correct answer: A
RAID 1 mirrors data. RAID 0 stripes with no redundancy, and RAID 5 and RAID 6 need at least three or four drives.
-
Question 4
What is the purpose of thermal paste between a CPU and its heat sink?
Correct answer: C
The surfaces look flat but have tiny air gaps that conduct heat poorly. Paste replaces that air; it is not an adhesive or an electrical path.
-
Question 5
Which power supply connector delivers the main power to the motherboard?
Correct answer: B
The 24-pin ATX connector feeds the board. SATA and Molex connectors power drives and fans, and the PCIe connector feeds a graphics card.
-
Question 6
A user wants the fastest internal storage available in a new desktop. Which option typically gives the highest throughput?
Correct answer: A
NVMe drives talk to the system over PCIe lanes, which are much faster than the SATA interface. A SATA SSD is the nearest runner-up but is limited by SATA.
-
Question 7
Which expansion slot is normally used to install a discrete graphics card in a desktop?
Correct answer: D
Graphics cards use the long PCIe x16 slot. DIMM slots hold memory and SATA ports connect storage drives.
-
Question 8
A desktop loses its date and time and resets its firmware settings every time it is unplugged. Which part has most likely failed?
Correct answer: C
A small coin cell keeps the clock and settings alive while the PC is off. A failed RAM stick or cable would not erase the clock.
-
Question 9
Which practice best protects components from electrostatic discharge while you work inside a computer?
Correct answer: D
The strap keeps you and the chassis at the same potential. Working on carpet builds up charge, and working on a powered system is unsafe.
-
Question 10
Which printer type uses a fuser assembly to bond toner to the paper?
Correct answer: A
A laser printer heats and presses the toner onto the page with the fuser. Inkjet, thermal and impact printers do not use toner and a fuser.
Questions you leave blank are not counted as wrong.